The screens are made in a dust free temperature controlled room. Only by doing this can we ensure that every screen is the same and will print perfectly once it gets to the press.
The printer’s state of the art facility has also been designed with the environment in mind as well. In all parts of the screen reclaim process eco friendly chemicals are used where possible, these are recycled and do not go near the drain.
 |
Spot Colours on Darks
This is the most common of screen prints. Art is separated into the different colours and a screen is made for each. With a dark shirt a white base print is put down and the colours go on top of this. It is a little more expensive than printing on a white shirt as each colour needs to be cured before the next colour goes on.
|
 |
Spot Colours on Lights
This is the most common of screen prints. Art is separated into the different colours and a screen is made for each. Each colour is printed directly onto the white tee so the print is only 1 layer thick.
|
 |
No Base Vintage Look
For this process we forgo the white base that we normally put under the colours. It gives and old authentic feel to the print.
|
 |
4 Colour Process on Dark
For this process we forgo the white base that we normally put under the colours. It gives and old authentic feel to the print.
|
 |
4 Colour Process on Light
This is a hi-resolution CMYK print that can be applied to white tees.
|
 |
Index Printing
This is a simulated process print using spot colours instead of CMYK inks.
|
 |
Discharge Base Prints
Discharge is a special kind of in that reacts with the pigments in the shirt to strip the dye out and take the shirt back to its natural colour. We can then overprint it with plastisol or waterbase inks to give a very soft thin hand.
|
 |
Metallics
This is an ink with flecks of silver in the ink to give the colour a metallic look.
|
 |
Foil Prints
This is a process that gives a mirror like finish to a print or part of a print. We can print up to 2 foil colours in a print. Available in a range of colours.
|
 |
High Density
With this process we build the print up on the front of the shirt. The above sample has had about 9 layers of ink.
|
 |
Non Woven Tote Bag - Direct Print
This is the most cost effective way to get a print on a non woven tote bag up to 3 colours and providing the colours don’t touch.
|
 |
Compendiums
We can print leather and leatherette goods with air drying solvent based inks. This gives a quality finish to the print and good durablilty.
|
 |
Large Format
We have a large format machine that will allow us to print up to 80cm x 80cm. This is a one hit process and we can only do more than 1 colour if registration is not important. Works Great on white tees and products like sunshades etc
|
|